Flanders Scientific Launches VP and V Series Reference Monitors With XMP's QD-OLED Panels From $5,995
VP Land
Nov 16, 2026 · 3 min read
Flanders Scientific launched seven QD-OLED reference monitors across two new lines, the VP and V Series, which use the same panels and GaiaColor calibration as its flagship XMP models but drop onboard scopes and look tools to start at $5,995. According to the VP and V Series announcement, facilities that already run scopes and LUTs on dedicated hardware or software can put the same reference image in more suites for less.
Same panels, fewer onboard tools. VP and V models use the QD-OLED panels from their matching XMP models and skip waveform, vectorscope, Look LUT support, Livegrade integration, processed SDI outputs and the front-panel keypad.
VP Series starts at $7,995. Four sizes from 26.5 to 65 inches, each with four 12G-SDI inputs, priced up to 30% below the equivalent XMP model.
V Series starts at $5,995. Three HDMI 2.1 and DisplayPort 1.4 models without SDI, priced up to 48% below the equivalent XMP model.
Calibration carries over. Both lines include GaiaColor AutoCal, GaiaColor Analyzer, LUM Coloring false color, custom markers and red-, green- and blue-only modes.
Shipping in November 2026. XMP and XMP C monitors stay in full production for anyone who needs the onboard tools.
VP Series keeps four 12G-SDI inputs for post houses that run scopes on separate gear
FSI designed the VP Series "with the post house in mind," for rooms where SDI connectivity and color accuracy matter but a standalone scope already sits in the signal chain.
VP270: 26.5 inches, 1,000 nits, $7,995 ($3,500 less than XMP)
VP310: 31.5 inches, 1,000 nits, $8,995 ($3,500 less than XMP)
VP551: 55 inches, 4,000 nits, $15,995 ($5,000 less than XMP)
VP651: 65 inches, 4,000 nits, $17,495 ($6,500 less than XMP)
FSI bases each comparison on U.S. MSRP against the XMP model with the same size and peak luminance.
Every VP model has four 12G-SDI inputs with clean SDI outputs, plus HDMI 2.1 and DisplayPort 1.4. Quad view supports independent color configuration for each input, so one display can show four sources.
The VP310 product page lists 1.5 million:1 contrast and says the monitor qualifies as a Dolby Vision mastering monitor. A simplified five-way controller on the back replaces the XMP's front keypad.
V Series drops SDI for HDMI and DisplayPort rooms at up to 48% below XMP
The V Series is the lowest-priced entry into FSI's QD-OLED monitors, aimed at setups where SDI isn't part of the signal chain.
V270: 26.5 inches, 1,000 nits, $5,995 ($5,500 less than XMP)
V310: 31.5 inches, 1,000 nits, $6,995 ($5,500 less than XMP)
V550: 55 inches, 2,000 nits, $12,495 ($7,500 less than XMP)
FSI lists applications including color grading over HDMI or DisplayPort, editorial, VFX, animation, game development and audio post. The V310 product page describes it as built for workflows where SDI and advanced scope or Livegrade integration may not be needed.
The company describes a facility mix: XMP or VP monitors in the primary grading suites, V monitors in editorial, VFX and audio rooms, all on the same panel technology.
Both lines keep GaiaColor calibration and add stereo 3D, which the XMP Series lacked
All FSI monitors ship pre-calibrated, and both new lines support GaiaColor AutoCal, which profiles every color space selection in one pass once a supported probe is plugged into the monitor. GaiaColor Analyzer handles performance verification.
GaiaColor calibration and analysis interface. Image: Flanders Scientific / Atomos
Both series run at 120 Hz and support stereo 3D through an optional active-glasses system. FSI calls 3D "a niche requirement" but says few professional monitors offer it.
On FSI's 31.5-inch comparison chart, the VP310 and V310 also have an HDMI 2.1 input, while the flagship XMP310 monitor and XMP310C do not.
The XMP C Series keeps onboard scopes, Look LUTs and Pomfort Livegrade integration, with the XMP310C at $10,495. The full XMP Series adds processed SDI outputs and front-panel keypad access.
"We are making it possible for customers to equip more workstations, more editing suites and more production environments with professional reference monitoring," said Peter Barber, Managing Director and CEO of parent company Atomos.
FSI's reference monitors came under Atomos through its Flanders Scientific acquisition, and the VP and V Series now sit below the XMP and XMP C lines as the lower-cost tiers.
Hexagon launched MANTIS by Leica Geosystems, a camera-mounted LiDAR system that records depth, camera movement and set geometry frame by frame while a cinema camera rolls. Its MANTIS Studio software turns each take in…
Blackmagic Design introduced the Blackmagic Ambisonic Microphone, a 108-capsule MEMS array with a built-in spatial encoder that records 7th-order ambisonics over a single USB-C cable. Capturing spatial audio for immer…
NVIDIA is positioning DGX Station as the local hardware base for an open agent stack that can run large models, govern their behavior, and call simulation tools inside Blender. Announced at SIGGRAPH , the